Dell BT-309 User Manual Download Page 4

 
1. Introduction

 

 

    The BT-309 is a GPS receiver with 

Bluetooth

 interface and built- in active antenna for 

high sensitivity to tracking signal. Based on the SiRF star 

e/LP low power chip set and 

supports all functions(SingleSat updates in reduced visibility, Superior urban canyon 

performance, FoliageLock for weak signal tracking, etc.). The BT-309 is well suited to 

system integration and users who use PDA, Smart phone, Tablet PC and Notebook PC with 

Bluetooth devices. It satisfies a wide variety of applications for car navigation, personal 

navigation or touring devices, tracking and marine navigation purpose.   

 

        

 

 

1.1 Package 

 

Before you start up, make sure that your package includes the following   

items. If any items are missing or damaged, contact your dealer immediately.  

??

Bluetooth GPS Receiver   

??

A CD with the User Manual and the Testing Program.  

??

AC Power Charger 

??

DC Car Power Charger 

??

External Antenna 

 

 

 

1.2 Power Switch 
 

 

Power on 

 

 

Power off 

 

1.3 Power Jack 

The power jack lets you to connect either a DC car power charger (included) or AC 

power charger (included) to recharge the internal battery. You can either use the included 

two chargers or an iPAQ-compatible AC adapter. Please note that the adapter rating 5V, 

1.2 A, positive pole center. 

 

 

Summary of Contents for BT-309











Reviews: