- 15 -
10
3. Insert USB FFC and
Audio FFC into I/F BD
11
1. Assemble Rear Cover
with Middle Frame
2. Lock 4 RC screws
Screw-
driver
(Screw
Torque:
8-10 kgf)
12
1. Align and place the stand
riser on the stand base
2. Open the screw handle at
the bottom of the stand
base and turn it clockwise
to secure the stand
assembly
3. Close the screw handle
4. Carefully insert the tabs
on the stand riser into the
slots on the display back
cover and lower the stand
assembly to snap it into
place
Note:
When
connecting
the stand
assembly to
the display,
do not place
the stand
riser directly
on the
display back
panel. Doing
so may
damage the
pogo pins on
the stand
due to
misalignment
