Steps
1. Place the battery on the palm-rest assembly.
2. Replace the three screws (M2x3) that secure the battery to the palm-rest assembly.
3. Replace the four screws (M2x4) that secure the battery to the palm-rest assembly.
4. Connect the battery cable to the system board.
Next steps
1. Install the
.
2. Follow the procedure in
After working inside your computer
.
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
Before working inside your computer
2. Remove the
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
27
