background image

Back to Contents Page

  

 

 Flashing the BIOS  

Alienware

® 

M11x Service Manual  

 

 

 

1.

Turn on the computer.  
 

 

  

2.

Go to 

support.dell.com/support/downloads

.  

 

 

  

3.

Locate the BIOS update file for your computer:  
 

If you have your computer's Service Tag: 

a.

 

Click 

Enter a Service Tag

.  

 

b.

 

Enter your computer's Service Tag in the 

Enter a service tag:

 field, click 

Go

, and proceed to 

step 4

.  

 

If you do not have your computer's Service Tag: 

a.

 

Click 

Select Model. 

 

 

b.

 

Select the type of product in the 

Select Your Product Family

 list.  

 

c.

 

Select the product brand in the 

Select Your Product Line

 list.  

 

d.

 

Select the product model number in the 

Select Your Product Model

 list.  

 

e.

 

Click 

Confirm

.  

 

 

 

4.

A list of results appear on the screen. Click 

BIOS

.  

 

 

  

5.

Click 

Download Now

 to download the latest BIOS file.  

The 

File Download

 window appears.  

 

 

  

6.

Click 

Save

 to save the file on your desktop. The file downloads to your desktop.  

 

 

  

7.

Click 

Close

 if the 

Download Complete

 window appears.  

The file icon appears on your desktop and is titled the same as the downloaded BIOS update file.  
 

 

  

8.

Double-click the file icon on the desktop and follow the instructions on the screen.  
 

Back to Contents Page

 

 

 

 

NOTE: 

The Service Tag for your computer is located at the bottom of the computer.

 

NOTE: 

If you have selected a different model and want to start over again, click 

Start Over

 on the top right of the menu.

Summary of Contents for Alienware M11x








































Reviews: