manualshive.com logo in svg

Dell ALIENWARE AURORA, Service Manual, Page: 110 / 117

Share
Download
Dell ALIENWARE AURORA Service Manual Download Page 110

0110

0110

/

CHAPTER 22: SYSTEM SETUP 

Integrated Devices

Configure SATA#1-6 as

 

(available on Aurora and Aurora ALX 

only)

Allows you to configure the integrated 

hard drive controller to AHCI or RAID.

SATA Mode 

(available on Aurora-R2 only)

Allows you to configure the integrated 

hard drive controller to AHCI or RAID.

AHCI CD/DVD Boot Time out

Allows you to set the wait time for 

SATA or CD/DVD in AHCI mode. 

Power Management Setup

Suspend Mode

Sets the energy-saving mode of the 

ACPI function.

AC Recovery

Sets what action the computer takes 

when power is restored.

Remote Wakeup 

(available on Aurora and Aurora ALX 

only)

Sets the system to wake up from an 

onboard LAN, PCIE-X1 LAN card, or a 

PCI LAN card.

Auto Power On

Allows the computer to start up at a 

certain time.

Integrated Devices

USB Functions

Allows you to enable or disable the 

integrated USB controller.

HD Audio Controller 

Allows you to enable or disable the 

integrated audio controller.

Onboard IEEE1394 Controller 

Allows you to enable or disable the 

onboard IEEE 1394 controller. 

LAN1 BCM5784 Device 

(available on Aurora and Aurora ALX 

only)

Allows you to enable or disable the 

onboard LAN controller.

Onboard LAN Controller 

(available on Aurora-R2 only)

Allows you to enable or disable the 

onboard LAN controller.

LAN1 Option ROM  

(available on Aurora and Aurora ALX 

only)

Allows you to enable and disable the 

network controller’s boot option.

Onboard LAN Boot ROM 

(available on Aurora-R2 only)

Allows you to enable and disable the 

network controller’s boot option.

SiL3132 E-Sata Device 

 

(available on Aurora and Aurora ALX 

only)

Allows you to enable and disable the 

e-SATA controller.

JMicron-362 E-SATA Device

 

(available on Aurora-R2 only)

Allows you to enable and disable the 

e-SATA controller.

Summary of Contents for ALIENWARE AURORA






















































































































Reviews:

No comments