Dell 7609WU - WUXGA DLP Projector, User Manual

Page: 22 / 62

Using Your Projector 22
NOTE:
If you press the Power button while the projector is running, the "
Press
Power Button to Turn off Projector
" message appears on the screen. To clear the
message, press the Menu button on the control panel or ignore the message; the
message disappears after 10 seconds.
Adjusting the Projected Image
Raising the Projector Height
1
Press the Elevator button.
2
Raise the projector to the desired display angle, and then release the button to
lock the elevator foot into position.
3
Use the tilt adjustment wheel to fine-tune the display angle.
Lowering the Projector Height
CAUTION:
Support the projector properly and do not place you hand near the
elevator foot when pressing the elevator button.
1
Press the Elevator button.
2
Lower the projector, and then release the button to lock the elevator foot into
position.
1
Elevator button
2
Elevator foot
3
Tilt adjustment wheel