Dell 6400 - Inspiron Laptop Service Manual Download Page 44

Page: 44 / 45

Back to Contents Page

Video Card/Thermal-Cooling Assembly

Dell™ Inspiron™ 6400/E1505 Service Manual

Removing the Video Card/Thermal-Cooling Assembly

Replacing the Video Card/Thermal-Cooling Assembly

Removing the Video Card/Thermal-Cooling Assembly

Follow the instructions in

Before Working Inside Your Computer

Remove the hinge cover (see

Removing the Hinge Cover

Remove the keyboard (see

Keyboard

Remove the display assembly (see

Removing the Display Assembly

Remove the palm rest (see

Removing the Palm Rest

Remove the video card/thermal-cooling assembly:

Loosen the two captive screws that secure the video card/thermal-cooling assembly and remove it from the system board.

Replacing the Video Card/Thermal-Cooling Assembly

Carefully align the video card/thermal-cooling assembly over the connector on the system board and press down.

Tighten the two captive screws on the video card/thermal-cooling assembly.

NOTE:

A removable video card is optional and present only if ordered by the customer. Standard video is integrated on the system board and is not

customer removable.

CAUTION:

Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working inside the

computer.

NOTE:

Remove the video card/thermal-cooling assembly as a single unit. Do not separate the thermal-cooling assembly from the video card.

video card/thermal-cooling assembly

captive screws (2)

NOTE:

The video card/thermal-cooling assembly is labeled "PUSH HERE."

Summary of Contents for 6400 - Inspiron Laptop














































Search results

Summary of Contents for 6400 - Inspiron Laptop

Reviews:

Related manuals for 6400 - Inspiron Laptop

Brands by name

Popular brands

Dell 6400 - Inspiron Laptop, Service Manual

Search results

Summary of Contents for 6400 - Inspiron Laptop

Reviews:

Related manuals for 6400 - Inspiron Laptop

Brands by name

Popular brands