b Remove the screw (M2x3) that secures the solid-state drive to the system board [1].
c Lift the solid-state drive at an angle, then slide and remove the solid-state drive from the solid-state drive slot [2].
Installing the solid-state drive
1
Align the notch on the solid-state drive with the tab on the solid-state drive slot [1].
2
At an angle, slide the solid-state drive into the solid-state drive slot [2].
3
Replace the screw (M2x3) that secures the solid-state drive to the system board [3].
Removing and installing components
21