Dell 5324 - PowerConnect Switch, Command Line Interface Reference Manual

Page: 79 / 388

Address Table Commands
79
bridge multicast address { mac-multicast-address | ip-multicast-address } [ add | remove ]
{ ethernet interface-list | port-channel port-channel-number-list }
no bridge multicast address {
mac-multicast-address
|
ip-multicast-address
}
• add —Adds ports to the group. If no option is specified, this is the default option.
• remove —Removes ports from the group.
• mac-multicast-address —MAC multicast address in the format of xx:xx:xx:xx:xx:xx.
• ip- multicast-address —IP multicast address.
•
interface-list
—Separate nonconsecutive Ethernet ports with a comma and no spaces; a
hyphen is used to designate a range of ports.
• port-channel-number-list —Separate nonconsecutive port-channels with a comma and no
spaces; a hyphen is used to designate a range of ports.
Default Configuration
No multicast addresses are defined.
Command Mode
Interface configuration (VLAN) mode
User Guidelines
• If the command is executed without add or remove , the command only registers the group in
the bridge database.
• Static multicast addresses can only be defined on static VLANs.
Examples
The following example registers the MAC address:
The following example registers the MAC address and adds ports statically.
Console (config)# interface vlan 8
Console (config-if)# bridge multicast address 01:00:5e:02:02:03
Console (config)# interface vlan 8
Console (config-if)# bridge multicast address 01:00:5e:02:02:03
add ethernet g1-9