Manually select signal type RGB, YCbCr, YPbPr.
Lamp Hour
Display operating hours since lamp timer reset.
Lamp Reset
Use this function only after a new lamp is installed in the projector. Select the left
Lamp Reset
icon (light bulb and arrow
under the icon), and press the
Enter
button to reset the lamp timer.
Power Saving Menu
Power Saving
Use this function to select the power saving delay period. Press "Yes" to go into the "set time" sub menu.
Set Time (Min)
Set the power saving delay period as you prefer. When the projector is not receiving an input signal for the selected period
of time, the projector will automatically enter power saving mode, and turn off the lamp. After a one-minute cooling period,
the projector will turn back on with detection of an input signal or by pressing the "Power" button. After two hours the
projector will turn off and must be turned on by pressing the power button on the control panel or remote.
Eco Mode
l
Select
On
to operate the projector in lower power (156 Watt) for providing longer lamp life and quiter operation with
dimmer luminance output on the screen.
l
Select
Off
to resume the operation in normal power (180 Watt).
Auto Source
The projector will always automatically search for available input signals when
Auto Source
is
On
, which is the default
setting. Press the
Source
button with
Auto Source
On
to automatically search for the next available input signal. Selecting
Off
will lock on the current input source. Set
Auto-Source
to
Off
to step through the different input signals manually.
Language Menu
