background image

Dell™ 3008WFP Flat Panel Monitor User's Guide

 

Notes, Notices, and Cautions 

 

 

 

 

 

 

 

Information in this document is subject to change without notice. 

© 

2007-

2009 Dell Inc. All rights reserved.

 

Reproduction in any manner whatsoever without the written permission of Dell Inc.

 

is strictly forbidden. 

Trademarks used in this text: 

Dell

 and the Dell logo are trademarks of Dell Inc; 

Microsoft, Windows,

 and

 Windows NT 

are registered trademarks of Microsoft Corporation; 

Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. 

 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

Model 3008WFPt 

December 2009 Rev. A05 

 

 

 

 

About Your Monitor 

 

Product Features

 

Identifying Parts and Controls

 

Monitor Specifications 

 

Universal Serial Bus (USB) Interface

 

Plug and Play Capability

 

Card Reader Specifications

 

Maintenance Guidelines

  

Setting Up the Monitor 

 

Connecting the Monitor 

 

Organizing the Cables 

 

Attaching the Soundbar (Optional)

 

Removing the Stand

  

Attaching the Stand

 

Operating the Monitor 

Using the Front Panel Controls 

 

Using the On-Screen Display (OSD) 

 

Setting the Optimal Resolution 

 

Using the Dell Soundbar (Optional)

 

Using the Tilt, Swivel, and Vertical Extension 

 

Solving Problems 

Monitor Specific Troubleshooting

 

Common Problems

 

Video Problems

 

Product Specific Problems

 

Universal Serial Bus (USB) Specific Problems

 

Troubleshooting the Dell™ Soundbar

 

Troubleshooting the Card Reader 

 

Appendix 

Safety Instructions 

 

FCC Notice (U.S. Only) and Other Regulatory Information 

 

Contacting Dell

  

 

 

 

 

 

 

 

 

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

NOTICE: 

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

 

CAUTION: 

A CAUTION indicates a potential for property damage, personal injury, or death.

Summary of Contents for 3008WFP - UltraSharp - 30" LCD Monitor






































Reviews: