Dell 3001YR2 - Axim X3 - Win Mobile, User Manual

Page: 105 / 178

G e t t i n g C o n n e c t e d
105
8
Install the network card driver, if required.
See the documentation that came with your network card.
9
Insert the network card into your device.
•
If a network with a broadcast SSID is detected, the wireless
network icon, , and the New Network Detected bubble
appear in the navigation bar. Go to step 10.
• If a network with a broadcast SSID is not detected, skip to step 11.
10
Tap The Internet .
NOTE:
If multiple networks are detected, tap the network to which you want to
connect, tap The Internet , and tap Connect .
11
Tap the Start button
→
Settings
→
Connections tab
→
Connections .
12
Tap the Wireless Ethernet icon.
13
On the Wireless tab, tap New Settings .
14
Enter the SSID next to Network Name , and tap The Internet .
15
Tap the Authentication tab to enable or disable WEP settings,
depending on your network type.
16
Tap OK .
17
Tap the connection icon, , that appears in the navigation bar.
18
Tap the name of your VPN connection to enable it.
Ending a Connection
To disconnect:
• When connected through dial-up or VPN, tap the Connection icon on
your navigation bar and tap End .
• When connected through a cable or cradle, detach your device from
the cable or cradle.
• When connected through the infrared sensor, move the device away
from the computer.
• When connected through a network (Ethernet) card, remove the card
from your device.