Dell 3000 Color Laser, Owner'S Manual

Page: 29 / 82

Using Your Printer
29
Initializing NVRAM
You can restore the original factory default menu settings by initializing NVRAM.
1.
Press Menu .
2.
Press until
Configure
appears, and then press or .
3.
Press until
Maintenance
appears, and then press or .
4.
Press until
Init NVRAM
appears, and then press or .
5.
The
Init NVRAM Are you sure?
message appears on the operator panel.
Press .
6.
Turn off the printer, and then turn it on again.
Setting of Panel Lock
This feature prevents unauthorized personnel from changing settings made by the printer
administrator. For regular printing, items can be selected from the menu and printer settings
remain unchanged.
For regular printing, items can be configured using the printer driver.
1.
Press Menu .
2.
Press until
Configure
appears, and then press or .
3.
Press until
Security
appears, and then press or .
4.
Panel Lock
is displayed. Press or .
5.
Press until
On
appears, and then press .
6.
Press .
7.
Press until
Change Password
appears, and then press or .
8.
Enter the old password (when you enter it for the first time after doing the settings, enter
0000
), and then press .
9.
Enter the new password, and then press .
10.
Reenter the password to confirm the password that you entered, and then press .
The password has been changed.
NOTE:
If you forget your password, turn off the printer. Then, while holding the Menu button, turn on the
printer. This will recover the factory default menu settings. The factory default panel password is
0000
.