Dell 2707WFP - UltraSharp - 27" LCD Monitor, Service Manual, Page: 7 / 113

27" LCD Color Monitor Dell 2707WFP
7
A
Input Source Select
Use Input Source Select button to select between five different video signals that may
be connected to your monitor.
1.VGA input
2.DVI-D input
3.S- Video input
4.Composite video input
5.Component video input
As you cycle through the inputs you will see the following messages to indicate
currently selected input source. It may take 1 or 2 seconds for the image to appear.
or
or
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not
connected, a floating dialog box as shown below appears.
or
If either S-Video or Composite input is selected and both cables are not connected or
the video source is turned off, the screen does not have an image. If any button is
pressed (except power button), the monitor displays the following message:
B
PIP / PBP Select
Use this button to activate PIP (Picture-in-Picture) / PBP (Picture-by-Picture) modes
adjustment.
Pressing this button continually cycles the monitor through the following modes :
OFF-->PIP-->PBP. You will see the following messages corresponding to the mode
selected.
C
OSD Menu / Select
The MENU button is used to launch the on-screen display(OSD) and select the OSD
Menu. See Accessing the Menu System.