Dell 1510 - Vostro - Core 2 Duo 2.1 GHz Service Manual Download Page 11

Page: 11 / 116

Troubleshooting

FILE LOCATION:

C:\Documents and Settings\sarah_cook\Desktop\Tsing

Ma\SM\A01\EN\Source\trouble.fm

DELL CONFIDENTIAL – PRELIMINARY 9/4/09 - FOR PROOF ONLY

Hardware Troubleshooter

If a device is either not detected during the operating system setup or is
detected, but incorrectly configured, you can use the Hardware
Troubleshooter to resolve the incompatibility.

Windows XP:

Click

Start

→

Help and Support

Type

hardware troubleshooter

in the search field and press

<Enter> to start the search.

In the

Fix a Problem

section, click

Hardware Troubleshooter

In the

Hardware Troubleshooter

list, select the option that best describes

the problem, and click

to follow the remaining troubleshooting steps.

Windows Vista

Click the Windows Vista start button

and click

Help and Support.

A possible graphics
card/video failure has
occurred.

• Reseat any installed graphics cards.

• If available, install a working graphics

card into your computer.

• If the problem persists, contact Dell

Support.

A possible LCD
failure has occurred.

• Reseat the LCD cable (see "Removing

the Display Assembly" on page 65).

• If the problem persists, contact Dell

Support.

A possible keyboard
failure has occurred.

• Reseat the keyboard (see "Removing

the Keyboard" on page 57).

• If available, connect an external

keyboard.

• If the problem persists, contact Dell

Support.

A possible USB
controller failure has
occurred.

• Remove any USB devices.

• If the problem persists, contact

contact Dell Support.

Light Pattern

Problem Description

Suggested Resolution

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz





















































































































Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

Dell 1510 - Vostro - Core 2 Duo 2.1 GHz, Service Manual

Search results

Summary of Contents for 1510 - Vostro - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 1510 - Vostro - Core 2 Duo 2.1 GHz

Brands by name

Popular brands