Dell 1150 Series, Quick Start Manual

Page: 14 / 20

w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
18
Quick Start Guide
After your computer restarts, the Internet Connection
Sharing installation is complete on the host computer.
To set up ICS on computers running Windows 2000:
1
Connect the host computer to the Internet using your
network connection, such as a cable or DSL modem.
2
Click the Start button, point to Settings, and click
Control Panel .
3
Double-click Network and Dial-up Connections .
4
If the host computer is connected to the Internet using
a dial-up connection, double-click Dial-up
Connection , click Properties , click Sharing , and then
ensure that both Enable Internet Connection Sharing
for this connection
and
Enable on-demand dialing
are
checked.
5
If the host computer is connected to the Internet using a
dial-up connection, double-click Dial-up Connection ,
click Properties , click Sharing , and then ensure that
both Enabled Internet Connection Sharing for this
connection and Enabled on-demand dialing are
checked.
If the host computer is connected to the Internet using a
cable or DSL modem , double-click Local Area
Connection . On the Network and Dial-up
Connections screen, click Yes .
The Internet Connection Sharing installation is
complete on the host computer.
Setting Up ICS on the Client Computer(s)
NOTE:
The client computer(s) must be running Microsoft
Internet Explorer 6.0, 5.0, or 4.0, and Windows XP, Windows
98 SE, Windows Me, or Windows 2000.
NOTE: All client computers must have the TCP/IP protocol
installed and DHCP enabled.
To install the TCP/IP protocol and enable DHCP:
1
Click the Start button, and click Help .
5C297eb3.fm Page 18 Thursday, March 7, 2002 11:39 AM