Dell EMC VxRail G Series, Owner'S Manual, Page: 12 / 22

Table 2 Control panel controls and indicators description (continued)
No. Name Color Status Description
Amber and
Blue Blinking DC on and fault
2 ID button with
LED Blue Blinking Identification activated
Off No identification
Each node is equipped with a power button and three LED indicators, which are visible
at the rear of the server. A fault with a node will cause the Power LED to blink blue,
and the Node Status LED to blink amber on its front control panel.
Pressing the ID button on the front control panels will cause the ID LED on the
respective node to blink.
Figure 4 Node controls and indicators
Table 3 Node controls and indicators description
No. Name Color Status Description
1 Power LED Blue On System power on
Off Power off
Blue Blinking Reports system health fault
2 Node Status
LED Off Normal - system healthy
Amber Blinking Reports system health fault
3 Power button Press and hold more than four seconds
to turn off node
4 ID LED Blue Blinking Identification activated (from front
control panel)
Off No identification
About the VxRail G Series
12 Dell EMC VxRail G Series Appliances 4.5 Owner's Manual