background image

Edge 3000 Series

The Dell EMC SD-WAN Edge 3000 Series (3400 and 3800) is a purpose-built platform that 
is integrated with VMware SD-WAN by VeloCloud software.
For detailed installation instructions, see the Dell EMC SD-WAN Edge 3000 Series 
Installation Guide a

www.dell.com/support

.

After unpacking the Edge 3000 Series, inspect the device and immediately report any 
damage to your Dell EMC sales representative.

Topics:

Installation instructions 

Specifications

Installation instructions 

Information icon definitions:

The Warning icon signals information about hardware handling that could result in injury.

The Caution icon signals information about situations that could result in equipment 

damage or lost of data.

The Note icon signals important operational information.

Install the device

WARNING: 

To avoid electrostatic discharge (ESD) damage, wear grounding wrist 

straps when handling this equipment.

WARNING: 

This device has optical transceivers, which comply with the limits of 

Class 1 laser radiation. When working with optical fibers, follow all warning labels 
and always wear eye protection.

WARNING: 

When no cable is connected, visible and invisible laser radiation may be 

emitted from the aperture of the optical transceiver ports. Avoid exposure to laser 
radiation and do not stare into open apertures.

4

Edge 3000 Series

Summary of Contents for SD-WAN Edge 3000 Series








Reviews: