![Dell EMC SD-WAN Edge 3000 Series Setup Manual Download Page 5](http://html1.mh-extra.com/html/dell-emc/sd-wan-edge-3000-series/sd-wan-edge-3000-series_setup-manual_2468331005.webp)
Install the device in an area that meets the following safety requirements:
•
Near a properly grounded AC power outlet.
•
In a temperature-controlled room with a continuous temperature range from 0°C to
45°C (32°F to 113°F).
•
In a dry, clean, and well-ventilated room away from heat sources such as hot air vents or
direct sunlight
•
Away from severe electromagnetic noise
•
Away from direct view within the workplace
1
Connect the power adapter to the AC power outlet. These power modules are 1+1
redundant power supplies.
NOTE:
Connect the device to a properly wired earth-ground AC power
outlet.
2
Connect one of the default WAN ports (GE3-6 or SFP1-4) to an available Internet
connection. SFP modules are not included.
3
If you received an email from your IT administrator, follow the instructions in the email
to complete the Edge activation.
Edge 3000 Series
5