Steps
1. Align and place the SD care reader with its slot on the palmrest.
2. Replace the (M2.5x2.5) screw to secure the SD card reader to the palmrest.
3. Connect the LED board cable to the SD card reader on the bottom side of the computer.
4. Connect the SD card reader cable to the connector on the system board.
Next steps
1. Install the
2. Install the
.
3. Install the
.
4. Install the
5. Install the
6. Install the
.
7. Install the
.
8. Install the
9. Follow the procedure in
after working inside your computer
.
Botón de encendido
Removing the power button
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
.
3. Remove the
4. Remove the
.
5. Remove the
.
6. Remove the
About this task
The figure indicates the location of the power button and provides a visual representation of the removal procedure.
Desmontaje y reensamblaje
57
Summary of Contents for Precision 7750
