Table 38. System setup options—Power Management menu(continued)
Power Management
Default: OFF
Wireless Radio Control
Control WLAN radio
Enables to sense the connection of the computer to a wired network and
subsequently disable the selected wireless radios (WLAN and/or WWAN). Upon
disconnection from the wired network, the selected wireless radios are re-enabled.
Default: OFF
Wake on LAN
Enables or disables the computer to turn on by a special LAN signal.
Default: Disabled
Intel Speed Shift Technology
Enables or disables the Intel Speed Shift Technology support. Setting this option to
enable allows the operating system to select the appropriate processor performance
automatically.
Default: ON
Lid Switch
Power On Lid Open
Enables the computer to power up from the off state whenever the lid is opened.
Default: ON
Table 39. System setup options—Wireless menu
Wireless
Wireless Device Enable
Enable or disable internal WLAN/Bluetooth devices.
By default, WLAN is selected.
By default, Bluetooth is selected.
Table 40. System setup options—POST Behavior menu
POST Behavior
Numlock Enable
Enable Numlock
Enables or disables Numlock when the computer boots.
Default: ON
Fn Lock
Enables or disables the Fn lock mode.
Default: ON
Lock Mode
Default: Lock Mode Secondary. Lock Mode Secondary = If this option is selected, the
F1-F12 keys scan the code for their secondary functions.
Warnings and Errors
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt, and wait for user input when
warnings or errors are detected.
NOTE:
Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Enable Adapter Warnings
Enables or disables the computer to display adapter warning messages when
adapters with too little power capacity are detected.
Default: ON
Enable Dock Warning Messages
Enables or disables dock warning messages.
Default: ON
Fastboot
Configures the speed of the UEFI boot process.
System setup
33
