System Setup details
The
System Setup Main Menu
screen details are explained as follows:
Option
Description
System BIOS
Enables you to configure BIOS settings.
iDRAC Settings
Enables you to configure the iDRAC settings.
The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI (Unified
Extensible Firmware Interface). You can enable or disable various iDRAC parameters by using the iDRAC settings
utility. For more information about this utility, see
Integrated Dell Remote Access Controller User’s Guide
at
Device Settings
Enables you to configure device settings.
Service Tag
Settings
Enables you to configure service tag settings.
System BIOS
You can use the
System BIOS
screen to edit specific functions such as boot order, system password, setup password, set the SATA and
PCIe NVMe, and enable or disable USB ports.
Viewing System BIOS
To view the
System BIOS
screen, perform the following steps:
1
Turn on, or restart your system.
2
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then restart
your system and try again.
3
On the
System Setup Main Menu
screen, click
System BIOS
.
System BIOS Settings details
The
System BIOS Settings
screen details are explained as follows:
Option
Description
System Information
Specifies information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings
Specifies information and options related to the installed memory.
Processor Settings
Specifies information and options related to the processor such as speed and cache size.
SATA Settings
Specifies options to enable or disable the integrated SATA controller and ports.
NVMe Settings
Specifies options to change the NVMe settings.
Boot Settings
Specifies options to specify the UEFI mode.
42
Pre-operating system management applications
