Icon
Description
Condition
Corrective action
If the problem persists, see the
section.
PCIe indicator
The indicator turns solid amber if a
PCIe card experiences an error.
Restart the system. Update any required drivers for the
PCIe card. Reinstall the card.
If the problem persists, see the
section.
NOTE:
For more information about the
supported PCIe cards, see the
section.
System health and system ID indicator codes
The system health and system ID indicator is located on the left control panel of your system.
Figure 7. System health and system ID indicator
Table 4. System health and system ID indicator codes
System health and system ID indicator code
Condition
Solid blue
Indicates that the system is turned on, system is healthy, and system
ID mode is not active. Press the system health and system ID button
to switch to system ID mode.
Blinking blue
Indicates that the system ID mode is active. Press the system health
and system ID button to switch to system health mode.
Solid amber
Indicates that the system is in fail-safe mode.
If the problem persists, see the
section.
Blinking amber
Indicates that the system is experiencing a fault. Check the System
Event Log or the LCD panel, if available on the bezel, for specific error
message. For more information about error messages, see the
Dell
Event and Error Messages Reference Guide
at
Dell.com/
openmanagemanuals
>
OpenManage software
.
iDRAC Quick Sync 2 indicator codes
iDRAC Quick Sync 2 module (optional) is located on the left control panel of your system.
Figure 8. iDRAC Quick Sync 2 indicator
PowerEdge R7425 system overview
13
