manualshive.com logo in svg

Dell EMC PowerEdge R6515, Installation And Service Manual, Page: 4 / 136

Share
Download
Dell EMC PowerEdge R6515 Installation And Service Manual Download Page 4

Removing the drive backplane cover..........................................................................................................................44
Installing the drive backplane cover............................................................................................................................ 45

Air shroud............................................................................................................................................................................. 46

Removing the air shroud...............................................................................................................................................46
Installing the air shroud................................................................................................................................................. 46

Cooling fan............................................................................................................................................................................47

Removing a cooling fan.................................................................................................................................................47
Installing a cooling fan................................................................................................................................................... 48

Intrusion switch....................................................................................................................................................................49

Removing the intrusion switch.................................................................................................................................... 49
Installing the intrusion switch.......................................................................................................................................49

Drives.................................................................................................................................................................................... 50

Removing a drive blank.................................................................................................................................................50
Installing a drive blank.................................................................................................................................................... 51
Removing the drive carrier............................................................................................................................................51
Installing the drive carrier............................................................................................................................................. 52
Removing the drive from the drive carrier................................................................................................................. 53
Installing the drive into the drive carrier..................................................................................................................... 54

Drive backplane................................................................................................................................................................... 54

Drive backplane..............................................................................................................................................................54
Removing the backplane ............................................................................................................................................. 55
Installing the drive backplane....................................................................................................................................... 56

Cable routing........................................................................................................................................................................58
System memory...................................................................................................................................................................59

System memory guidelines...........................................................................................................................................59
General memory module installation guidelines.......................................................................................................... 61
Removing a memory module........................................................................................................................................63
Installing a memory module.......................................................................................................................................... 63

Processor and heat sink..................................................................................................................................................... 64

Removing a heat sink.................................................................................................................................................... 64
Removing the AMD processor.....................................................................................................................................65
Installing the AMD processor....................................................................................................................................... 67
Installing the heat sink...................................................................................................................................................69

Expansion cards and expansion card risers.......................................................................................................................71

Expansion card installation guidelines.......................................................................................................................... 71
Removing the expansion card risers............................................................................................................................72
Installing the expansion card risers.............................................................................................................................. 74
Removing expansion card from the expansion card riser.........................................................................................75
Installing an expansion card into the expansion card riser........................................................................................77

Micro SD card...................................................................................................................................................................... 79

Removing the MicroSD card........................................................................................................................................80
Installing the MicroSD card.......................................................................................................................................... 80

M.2 SSD module...................................................................................................................................................................81

Removing the M.2 SSD module................................................................................................................................... 81
Installing the M.2 SSD module..................................................................................................................................... 82

Optional IDSDM module..................................................................................................................................................... 83

Removing the IDSDM module......................................................................................................................................83
Installing the IDSDM module........................................................................................................................................ 84

LOM riser card.....................................................................................................................................................................85

Removing the LOM riser card......................................................................................................................................85

4

Contents

Summary of Contents for PowerEdge R6515









































































































































Reviews:

No comments