Steps
1. Slide the solid-state drive mounting bracket into the slot on the palm-rest and keyboard assembly, if it is not installed.
2. Align the notches on the solid-state drive with the tabs in the SSD2 slot on the system board.
3. Slide the solid-state drive into the SSD2 slot on the system board.
4. Replace the screw (M2x4) that secures the solid-state drive to the palm-rest and keyboard assembly.
Next steps
1. Install the
2. Install the
.
3. Follow the procedure in
After working inside your computer
.
Removing the M.2 2280 solid-state drive from the SSD2
slot
Prerequisites
1. Follow the procedure in
Before working inside your computer
.
2. Remove the
3. Remove the
.
About this task
NOTE:
This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed in the SSD2 slot.
The following image indicates the location of the M.2 2280 solid-state drive that is installed in the SSD2 slot and provides a visual
representation of the removal procedure.
Disassembly and reassembly
27
Summary of Contents for P92F
Page 40: ...40 Disassembly and reassembly ...
Page 42: ...42 Disassembly and reassembly ...
Page 48: ...48 Disassembly and reassembly ...
