Setting up Your Dell EMC NX440 System
(continued)
4
|
Initial configuration
5
|
More information
1.
When you start your NAS system that runs Windows Stor-
age Server 2016 for the first time, on the
Default Pass-
word
page,
click
OK
.
NOTE:
Before changing the password, make sure that
you change the system language according to your
preference.
2.
To change your administrator password, press Ctrl+Alt+Del,
and then click
Change a Password
.
3.
To change the default language, navigate to
C:\Dell_OEM\MUI
and run the appropriate language
batch file. Complete the on-screen instructions to install
your preferred language.
Server Manager
starts automatically when you log in the first
time.
In
Server Manager
, click
Configure this local server
to:
•
Change the computer name (if required)
•
Add NAS system to the domain
•
Check for latest Windows updates
•
Specify the time zone
•
Configure remote desktop
NOTE:
To start a software system, on the taskbar,
click
Start
, and then click the program name.
Dell EMC OpenManage Server Administration
You can monitor your system remotely by using Dell EMC OpenManage Server Administrator. To access Dell EMC OpenManage Server Administrator, connect to the
secure port, 1311, of your NAS system. For example, type:
https://D<ServiceTag>:1311
,
where
<ServiceTag>
is Service Tag.
To locate the Service Tag of your
system, see the section
Locating your system Service Tag
in this document.
Documentation
For more information, see the following documentation at
Dell.com/storagemanuals
.
Title
Description
Getting Started Guide
Provides an overview of system features, setting up your system, and technical specifications. This document is also
shipped with your system.
Installation and Service Manual
Provides information about system features and describes the system and installing or replacing system components.
Rack Installation Guide
Describes the process of installing your system into a rack. This document is also shipped with your rack solution.
Administrator’s Guide
Provides information about configuring and managing the system.
Troubleshooting Guide
Provides information about troubleshooting the software and the system.
Dell EMC OpenManage Server
Administrator User’s Guide
Provides information about using the OpenManage Server Administrator to manage your Dell EMC system or NAS
system.
NOTE:
For any documentation related to Dell EMC OpenManage Server Administrator, go to
Dell.com/
openmanagemanuals
.
Documentation feedback
You can rate the documentation or write your feedback on any of our Dell EMC Documentation pages and click
Send Feedback
to send your feedback.
Copyright © 2019 Dell Inc. or its subsidiaries.
2019 - 05
Rev. A00
Starting remote desktop
NOTE:
Make sure that you have completed the Initial Configuration tasks before connecting to the NAS system using remote desktop.
•
Enable remote desktop using Server Manager or system properties (
Control Panel
→
System
).
•
If Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS) are implemented on your network, your system automatically configures the
network settings. You can start remote desktop from a client and remotely access the NAS system using either the default system name or the IP address.
For example, in the
Remote Desktop Connection
dialog box, type
D<ServiceTag
>, where <
ServiceTag> is the Service Tag.
To locate the Service Tag of your system, see the section
Locating your system Service Tag
in this document.
NOTE:
The default password is
Stor@ge!
