Switch module monitoring
Topics:
•
•
•
•
•
•
Port-side LEDs
Each switch module uses bicolored external LEDs to indicate operation status. After you install the switch module in a blade server chassis
I/O module, the LEDs become active.
Figure 8. Switch module front panel LEDs
1
FC port 0 status LED
2
FC port 17 status LED
3
FC port 24 status LED
4
Module power status LED
5
Module identification LED
Table 4. Port-side LEDs
LED
Description
Module power and status LED
•
Solid green—The switch is working correctly.
•
Blinking amber—The switch is working incorrectly. The
temperature may be too high, a software error has occurred, or
another error is discovered.
•
Off—There is no power supplied to the FC switch module.
Reseat the module and ensure that the chassis power is on and
it has adequate power for the I/O module.
Module identification LED
•
Off—Module is not identified.
•
Blinking blue—Module is being identified.
6
22
Switch module monitoring
