Dell EMC E17W, Getting Started Manual

Page: 57 / 63

ﻞﻴﻐﺸﺘﻟا ءﺪﺑ ﻞﻴﻟد
56
Step 2 :
Now we need to set up your initial privilege (Level
15 ( user account. This account is used to login to the
CLI and Web interface. You may set up other accounts
and change privilege levels later. For more
information on setting up user accounts and changing
privilege levels, see the user documentation .
To set up a user account :
Please enter the user name. [root]: admin
Please enter the user password : ********
Please reenter the user password : ********
Step 3 :
Next, an IP address is set up on the VLAN 1 routing
interface .
You can use the IP address to access the CLI, Web
interface, or SNMP interface of the switch .
To access the switch through any Management Interface
you can
. Set up the IP address for the Management Interface .
. Set up the default gateway if IP address is
manually configured on the routing interface .
Step 4 :
Would you like to set up the VLAN1 routing interface
now? [Y/N] y
Please enter the IP address of the device (A.B.C.D) or
enter “DHCP” (without the quotes) to automatically
request an IP address from the network DHCP server :
10.1.1.200
Please enter the IP subnet mask (A.B.C.D or /nn :(
255.255.255.0
Step 5 :