Figure 59. Removing the M.2 SSD module
Next step
Installing the M.2 SSD module
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
Before working inside your system
.
3
4
Remove the BOSS card.
NOTE:
The procedure to remove the BOSS card is similar to the removing an expansion card.
Steps
1
Align the M.2 SSD module at an angle with the BOSS card connector.
2
Insert the M.2 SSD module until it is firmly seated in the BOSS card connector.
3
Using the Phillips #1 screwdriver, secure the M.2 SSD module on the BOSS card with the screw.
Installing and removing system components
85