NIC ports specifications
The Dell EMC PowerEdge R340 system supports up to two 10/100/1000 Mbps Network Interface Controller (NIC) ports that are located
on the back panel.
Serial connector specifications
The Dell EMC PowerEdge R340 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal
Equipment (DTE), 16550-compliant.
VGA ports specifications
The PowerEdge R340 system supports one DB-15 VGA port located on the back panel of the system.
IDSDM module
The Dell EMC PowerEdge R340 system supports optional Internal Dual SD module (IDSDM) module.
The module supports three microSD cards; two cards for IDSDM and one card for vFlash. In 14
th
generation of PowerEdge servers, the
IDSDM or vFlash module is combined into a single card module, and is available in the following configurations:
•
vFlash or
•
vFlash and IDSDM
Table 25. Supported microSD card storage capacity
IDSDM card
vFlash card
•
16 GB
•
32 GB
•
64 GB
•
16 GB
NOTE:
There are two dip switches on the IDSDM or vFlash module for write-protection.
NOTE:
One IDSDM card slot is dedicated for redundancy.
NOTE:
Use Dell EMC branded microSD cards that are associated with the IDSDM or vFlash configured systems.
Video specifications
The Dell EMC PowerEdge R340 system supports integrated Matrox G200 graphics controller with 16 MB of video frame buffer.
Table 26. Supported video resolution options
Resolution
Refresh rate (Hz)
Color depth (bits)
640 x 480
60, 72
8, 16, 24
800 x 600
60, 75, 85
8, 16, 24
116
Technical specifications
