Page 2
Delkin Devices User’s Manual
USB SD / MultiMediaCard Reader
DDREADER-08
Driver Software Installation for Apple Macintosh
Driver Software Installation Procedure for Apple MacOS 9/ X
Driver installation is not necessary for the MacOS 9 and X operating systems. When the
Pocket Reader-MMC is connected to the USB port, the computer will automatically
detect it and configure the correct drivers. With a card inserted, the reader can be
accessed through the disk icon that will appear on the desktop. For these operating sys-
tems, the Pocket Reader-MMC will use the MSD (Mass Storage Device) specification.
Driver Software Installation Procedure for Apple MacOS 8.5.1+
Before connecting the Pocket Reader-MMC, you must install the device drivers located
on the accompanying CD-ROM. To avoid compatibility issues, install only the Pocket
Reader-MMC driver. Slot (front) loading CD-ROMs may not function correctly with a 3”
CD disk. For these systems it is recommended that you download the driver from
www.delkin.com
Prior to any software installation always ensure you have backed up your hard drive
and prepared a recovery disk.
4.
Verify that your product matches
the one pictured on the screen.
5.
Click the
INSTALL
button and
follow the on-screen instructions.
For best results, allow the drivers
to be installed into the default
locations.
6. When the
Setup Complete
screen
appears, click the
Finish
button.
7. Connect the Pocket Reader-MMC
to the USB port or hub.
8. You may now insert a MultiMedia
Card and access it like other drives
by clicking the
Removable Disk
drive icon in
My Computer
.
1. Insert the Driver CD-ROM, then double-
click on the CD icon when it appears.
2.
Select Pocket Reader-MMC from the
product list. (See Figure 2)
3. Click the button labeled
Install
and follow
the on-screen instructions. Select
Restart
Computer
after installation is complete.
4. You may now insert a MultiMedia
Card and access it through the
Untitled Disk icon on the desktop.
