Deliberant DBL2119, User Manual

Page: 18 / 65

17
In Wireless > WDS Settings, make sure “Enable WDS” is checked. Enter the MAC address from Radio B into the WDS
Settings for Radio A (no colons or spaces). Click “Apply Changes”
The MAC address will then show up in the Current WDS AP List.
NOTE: This will need to be done on both radios.
The WDS should then be established.
NOTE: Be careful not to create a network loop without having STP (Spanning Tree Protocol) enabled on both units.
Configuring Universal Repeater
This device can be configured as a Repeater. In this mode, the device can extend the available wireless range of other AP and
let the user link to the network that they want. (The device is working as an AP and Repeater at the same time.)