4
Installation
Assembly of the X-ray and detector (wall) stand
Attach the upper part of the detector and X-ray stand to the lower using the
provided guidance strip and bolts. Determine the best way to setup the stands in the
available venue, see above considerations on correct placement.
Take all components out of the backpack. Before starting, make sure both the
detector and X-ray batteries are fully charged.
Detector installation
1.
If not done put the detector in
the holder. Make sure the image
area faces the front of the
holder. The battery part should
be visible on the back. Make sure
the battery is full before installing
it. See image for reference.
2.
Carefully hang the detector
holder on the Versarix holder.
Power on the detector using the
power button on the side.
Summary of Contents for Delft Light
Page 1: ...User Manual Delft Light ...
