Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Exterior
top shall be one-piece, 22-gauge stainless
steel with front edge turned down to form nosing
and rear edge turned up to form a 4” (10.2cm) high
backsplash. Exterior back and bottom shall be one-
piece, 24-gauge galvanized metal. Exterior ends shall
be 22-gauge stainless steel.
Base
interior shall be one-piece thermoformed ABS
plastic material, with integral shelf supports. Cabinet
shall have (4) epoxy-coated wire shelves installed.
Base shall be fully insulated with high-density
foamed-in-place polyurethane.
Doors
shall have a 22-gauge stainless steel exterior,
with a thermoformed ABS plastic interior liner,
and shall be fully insulated with foamed-in-place
polyurethane. Door handles shall be black, recessed
ABS.
Electrical
connections shall be 115 volt, 60 Hertz,
single phase. Unit shall have a 7’ (2.1m) long
electrical cord and NEMA 5-15P plug. Cord and plug
shall be located on rear of cabinet, 16” (40.6cm)
above floor, 12” from the left.
Equipment shall be mounted on 6” (15.2cm) high
metal legs with black enamel finish.
THE FOLLOWING APPLIES TO MODEL ST4048
(REFRIGERATOR) ONLY:
Refrigeration system shall use HFC-404A refrigerant.
Compressor shall be 1/5 h.p., with condenser coil
and hot gas condensate evaporator mounted on rear
of cabinet. Evaporator coil and temperature control
shall be mounted on the interior rear wall of the
cabinet. Refrigerant flow shall be controlled by a
capillary tube. Cabinet shall maintain 36°F to 40°F
(2°F to 4°C) interior cabinet temperature.
THE FOLLOWING APPLIES TO MODEL ST4148
(FREEZER) ONLY:
Refrigeration system shall use HFC-404A refrigerant.
Compressor shall be 1/3 h.p., with condenser coil
and hot gas condensate evaporator mounted on rear
of cabinet. Evaporator coil and temperature control
shall be mounted on the interior rear wall of the
cabinet. Refrigerant flow shall be controlled by a
capillary tube. Cabinet shall maintain -5°F to 0°F (-
21°to -18°C) interior cabinet temperature.
Specifications
Standard Features
Options &
Accessories
• Features Delfield’s exclusive ABS interior.
ABS is extremely durable - it won’t dent,
chip or corrode and is backed by a
limited lifetime warranty
• Stainless steel front, sides and top
• Environmentally
friendly
R404A
refrigerant
• Foamed in place polyurethane cuts
energy costs
• Black recessed quick grip handle
• Rugged 6” high heavy duty metal legs
• Door hinging available on either right
or left, right side is standard
• 60-cycle single phase electrical system
• 7’ cord and plug supplied
• One year parts and 90 day labor
standard warranty.
• 4” backsplash has two knockouts with
covers for electrical outlets (outlets
provided by others)
• Four epoxy coated wire shelves standard
per unit
ST4048
Two section worktop
refrigerator
ST4148
Two section worktop
freezer
Models
4000 Series
Self-Contained Worktop Refrigerator/Freezer
40
00
S
eri
es
S
elf
-C
on
ta
in
ed
W
or
k T
op
R
efr
ig
era
to
r/F
re
ez
er
o Stainless steel back
o Plastic laminate on front
o Additional wire shelves
o Stainless steel single-tier overshelf
o 5” (12.7cm) diameter casters
o Door lock
o 220 volt, 50 Hertz electrical system
ST4048
