Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Delfield
™
®
Operation Description:
Unit is designed to safely and quickly thaw
frozen food under controlled temperature conditions. Both full and
partial loads can be thawed. Product will be taken from 0˚F to 38˚F
in approximately 18 hours. Once product is thawed, it is held at
33˚F to 41˚F. Thawing is automatic once thaw mode is selected with
switch located behind flip up shroud.
Exterior:
Cabinet exterior sides, front and shroud shall be corrosion
resistant stainless steel. Upper shroud shall be hinged, with stay-
open feature to provide easy access to refrigeration system.
Interior:
Cabinet interior shall be corrosion resistant stainless
steel. Bottom and top surfaces are die stamped to provide radius
corners and recessed floor. Three chrome plated wire shelves are
provided per section. Shelves rest on clips which are adjustable
in 1” increments on stainless steel pilasters affixed to the cabinet
interior. Pilasters are removable without tools for cleaning. Interior
incandescent light, mounted to the interior ceiling is controlled
automatically through a switch mounted in the hinge assembly to
protect against breakage. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct is mounted to the
ceiling assuring low velocity, even air movement throughout the
cabinet interior.
Doors:
Exterior shall be corrosion resistant stainless steel. Interior
liner shall be resilient high impact ABS material, formed to protrude
beyond the door gasket to protect the gasket from tearing. Each
door has two edge mount, self closing, cam lift style hinges. Doors
can be removed from cabinet without the use of tools. Metal door
handle is recessed into the door for easy grip without impacting aisle
space. Keyed door lock is mounted in the door next to the handle.
Lock engages into a heavy duty strike mounted to the cabinet face.
Door gaskets are magnetic and mount to the door snapping in place
and are removable without tools.
Refrigeration system:
All components are mounted to the exterior
cabinet ceiling, outside the food zone and are assembled as one
piece and can be removed as one piece. Environmentally friendly
R404A refrigerant is used. System has the capability of maintaining
between 27˚F and 44˚F in heavy use food service operations.
Refrigerant is metered using a highly responsive thermostatic
expansion valve. System is controlled using Delfield’s ACT-Advanced
Control Technology electronic temperature control, which provides
improved pull down times, reducing compressor cycling and longer
compressor life with lower energy consumption.
Control system uses adaptive defrost to assure evaporator coil is free
of ice and operating at optimum efficiency. Evaporator condensate
is eliminated using an energy efficient hot gas system.
Thawing aided by mullion mounted heater and fan system.
Electrical:
Standard electrical connections shall be 115V, 60Hz,
single phase. A 10’ cord and plug is supplied attached to a junction
box mounted on the exterior top of the cabinet.
Specifications
Standard Features
Options &
Accessories
Stainless steel interior and exterior
Built in door locks with heavy duty strikes
Recessed metal door handle
Pressure relief valve is standard to prevent
door vapor lock
Exterior digital thermometer
Easy to use electronic control
Easy access “flip up” panel
Three chrome plated wire shelves per
section
Tough ABS interior door liners
10’ attached cord and plug
6” adjustable stainless steel legs
Stainless steel breaker strips
High
density
foamed
in
place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
Energy savings door heater switch
Two year parts & labor warranty
Five year compressor warranty
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SST2-S
Stainless exterior and interior full door
SST2-SH
Stainless exterior and interior half door
Models
Specification Line®
Self Contained Solid Door Two-Section Ready Thaw
Cabinet Reach In
Sp
ec
ifi
ca
tio
n L
in
e®
: S
olid
D
oo
r T
w
o S
ec
tio
n R
ea
dy
Th
aw
C
ab
in
et
Re
ac
h I
n
Security package
6” polyurethane casters
Door field rehingability
Stainless steel interior door liner
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
•
•
•
•
•
•
•
•
•
•
•
•
•
•
SST2-S
