PROJECT
ITEM #
QUANTITY
DATE
APPROVAL
The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com
Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A.
Short Form Specifications
Exterior body
is constructed of 18-gauge stainless steel side panels and
14-gauge galvanized bottom. All exterior side panels are reinforced with
overlapping corners and are welded in place. All body cutouts are reinforced
with 14-gauge galvanized channel supports.
Exterior top
is constructed of 14-gauge stainless steel, welded, ground and
polished into one integral unit. Top is fabricated with square exterior corners. Top
has one (SCM-36), two (SCM-50), three (SCM-60) or four (SCM-74) die-stamped
openings and is provided with hinged removable lids. Lids are constructed of
stainless steel and have a rubber gasket seal.
Refrigerated Compartment;
have water-tight inner liner constructed of
22-gauge stainless steel, with radius corners and 1.5” (3.8cm) of polyure-
thane insulation. Compartment is equipped with a drain plumbed to a
drain valve located in the bottom of the unit. Refrigerated compartment
is equipped with automatic self leveling, field adjustable elevators. Divider
trays are supplied.
Refrigeration;
copper refrigeration coils are attached to outside of inner liner.
Unit is refrigerated by self-contained, 115 volt, 60 Hertz, single phase hermeti-
cally sealed condensing unit with pressure control. Unit is wired with a 3-wire,
grounded, maximum 10’ (3m) 120 volt cord and plug. Refrigeration system use
HFC-134a refrigerant
Casters;
unit is mounted on 5” (12.7cm) diameter swivel casters with non-
marking polyolefin tires and plate brakes. Overall height of caster assembly
is 6” (15.2cm).
Optional Accessories and Modifications
A)
12” (30.5cm) wide stainless steel fold-down tray slide
C)
10” (25.4cm) wide three-bar fold-down tray slide
E)
10” (25.4cm) wide stainless steel fold-down work shelf
F)
Line-up interlock device
R)
10” x 17” x 4” (25.4cm x 43.2cm x 10.2cm) deep chrome wire baskets
S)
Stainless steel lid locking device with keyed lock
ST)
Stainless steel trim strips
U)
14” x 30” (35.6cm x 76.2cm) stainless steel end drop shelf
V)
6” (15.2cm) high adjustable stainless steel legs in lieu of casters
X)
Laminate exterior panels in lieu of stainless steel exterior panels
Model SCM-50
Mobile Milk Counters
SCM
