background image

The Delfield Company, 980 S. Isabella Rd., Mt. Pleasant, MI 48858, U.S.A. • (800) 733-8821 • Fax (800) 669-0619 • www.delfield.com

Delfield reserves the right to make changes in design or specifications without prior notice. ©2002 The Delfield Company. All rights reserved. Printed in U.S.A. 

PROJECT

ITEM #

QUANTITY   

 

DATE

APPROVAL

403

Self-contained compact work top freezers

The refrigeration system on this 

equipment uses HFC--404A refrigerant.

Short form specifications

Exterior top shall be one-piece, 22-gauge stainless steel with front edge turned down 

to form nosing and rear edge turned up to form a 2" (5.1 cm) thick by 4" (10.2 cm) high 

backsplash.

Exterior back and bottom shall be one-piece 24-gauge galvanized metal. Exterior ends 

shall be 22-gauge stainless steel.

Base interior shall be one-piece thermoformed ABS plastic material, with integral shelf 

supports. Base shall be fully insulated with high-density foamed-in-place polyurethane.

Refrigeration system shall use HFC-404A  refrigerant. Compressor shall be ¢ h.p., with 

condenser coil and hot gas condensate evaporator mounted on rear of cabinet. Evapora-

tor coil and temperature control shall be mounted on the interior rear wall of the cabinet. 

Refrigerant flow shall be controlled by a capillary tube. Cabinet shall maintain

–5°F to 0°F (–21°C to –18°C) interior cabinet temperature.

Electrical connections shall be 115 volt, 60 Hertz, single phase. Unit shall have a 7' (2.1 

m) long electrical cord and NEMA 5-15P plug. Cord and plug shall be located on rear of 

cabinet, centered left to right, 16" (40.6 cm) above floor.

Equipment shall be mounted on 6" (15.2 cm) high metal legs with black enamel finish.

THE FOLLOWING APPLIES TO MODEL 403 (SINGLE DOOR) ONLY:

Doors shall have a 22-gauge stainless steel exterior, with a thermoformed ABS plastic 

interior liner, and shall be fully insulated with foamed-in-place polyurethane. Door 

handles shall be black, recessed and shall extend the full length of the top of the door. 

Cabinet shall have (2) adjustable epoxy-coated wire shelves installed. 

Optional accessories & modifications

Stainless steel back

Plastic laminate on front

Additional wire shelves

Stainless steel single-tier overshelf

3.5" (8.9 cm) diameter casters

5" (12.7 cm) diameter casters

Door lock

Full-size composite-type cutting top

220 volt, 50 Hertz electrical system

Model 403

Reviews:

Related manuals for 403 Standard