LED and Beeper Indications
Quick Reference Guide
23
LED and Beeper Indications
The reader’s beeper sounds and its top multi-colour LED illu-
minates to indicate various functions or errors on the reader.
An optional “Green Spot” also performs useful functions. The
following tables list these indications. One exception to the
behaviors listed in the tables is that the reader’s functions
are programmable, and so may or may not be turned on. For
example, certain indications such as the power-up beep can
be disabled using programming bar code labels.
Contaminants Spray/rain
Dust/particulates
IEC 529-IP42
(IP51 QD2430-E model only)
ESD Level
16 KV
Regulatory
Electrical Safety
UL 60950, CSA C22.2 No. 60950, IEC 60950
EMI/RFI
North America (FCC) : Part 15 Class B; Canada ( IC) : ICES-
003 Class B; Russia ( Gost); European Union EMC Directive;
VCCI-Japan; Korean KCC; Taiwan EMC (BSMI);
Australia (ACMA); Mexico (NOM)
Indicator
Description
LED
Beeper
Power-up Beep
The reader is in the pro-
cess of powering-up.
Reader beeps four
times at highest fre-
quency and volume
upon power-up.
Good Read Beep
A label has been suc-
cessfully scanned by
the reader.
LED behavior for this
indication is configu-
rable via the feature
“Good Read: When to
Indicate”
(see the PRG for infor-
mation.)
The reader will beep
once at current fre-
quency, volume,
mono/bi-tonal set-
ting and duration
upon a successful
label scan.
ROM Failure
There is an error in the
reader's software/pro-
gramming
Flashes
Reader sounds one
error beep at highest
volume.
