2. BICYCLE ASSEMBLY
2.1. Remove the bicycle and parts from the shipping package. Be sure to remove all small boxes.
2.2. Put on the wheel and tighten the wheel axle nuts.
Watch the video:
2.3. Loosen the bolts that are holding the fork, then position and align the fork, then re-tighten the
bolts, being careful not to overtighten.
2.4. Attach the pedals.
Watch the video:
2.5. Install the handlebars, accessories, mirrors, and throttle/grips, and carefully tighten all hardware.
Watch the video:
How everything should look after assembly:
3. CHARGING THE BATTERY
3.1. Before operating you must fully charge the battery!
3.2. The charger is equipped with a charging indicator:
red colour: the battery is currently charging;
green colour: the battery is fully charged.
3.3. It takes about 5 hours to fully charge the bike.
3.4. ONLY charge the battery with the charger
that is included in the delivery or with the optional
Delfast Supercharger.
3.5. Never leave the bike unattended when charging.
3.6.
It is critically important to charge the battery at
least once a month.
If you fail to do so, it may cause
a battery damage!
Summary of Contents for Prime 2018
Page 1: ...QUICK START GUIDE ...
