36 • Using the Delcam Orthotic Insoles Software
Delcam iQube 2010 Reference Manual
6.
Click
Scan Left Foot
or
Scan Right Foot
panels as
appropriate.
7.
The scan mode button you selected determines how the scan data is
collected.
Take Scan Immediately
starts the scan immediately
performed. The scan data is collected and passed to the Delcam
Orthotic Insoles software.
Retrieve scan stored on scanner
takes data from a
previous iQube scan and passes it to Delcam Orthotic Insoles
software.
The iQube scan activation switch will glow red while the
scan and subsequent processing is being performed. Do not
attempt to perform any other software operations during this
period.
The time taken to retrieve the scan depends on:
The size of the item being scanned.
Foam Box = larger surface area = longer time
Foot = smaller surface area = shorter time
The number of cameras you are using. This is depends if you
are using
Fast
or
High Definition
, as specified in the default
settings (see page 41):
Fast
= 3 Data Cameras = shorter time
High Definition
= 5 Data Cameras = longer time
By default, a five camera system (E500) will use 3 cameras
when using the Foot Scanning mode. To change to 5 cameras,
see Changing the Default Scan Settings (see page 40).
