Preparing the project map
A project must have at least one georeferenced background map. Objects within a georeferenced map are
associated with a unique geographical location.
To prepare the project map, select the
Map layers
tab.
The
Map layers
tab, with an example map, is shown below:
For more information, see:
l
Adding a background map, page 24
l
Adding information to the map, page 25
l
Adding a background map
You can use an online map, an offline map, or you can add your own georeferenced map.
Using an online map
1. Make sure you have Internet access.
2. Click
on the map and then enter the location of interest. The map shows the area around the
location using your preferred online map provider (see
Changing the system settings, page 16
).
3. Zoom in or out, or pan until you view the preferred map area.
Note –
The online map is always available as a layer and cannot be deleted. You can have only one online
map layer per project.
24
Delair-Tech
|
676, Rue Max Planck – 31670 Toulouse-Labège, France
|
Tel: +33 (0) 5 82 95 44 06
|
Capital: 238 110,30 € - APE: 3030Z – Intra-Community VAT number: FR90 53 09 69 781 – 530 969 781 R.C.S. Toulouse
This document is the sole property of Delair-Tech and cannot be used or reproduced without the written authorization of Delair-Tech
.
