Delachaux Conductix-Wampfler 1400 Series, Manual, Page: 13 / 20

13
1400 SerieS cable reel manual P/n 962000 2008.10.3 rev. 6
4.0 Maintenance
4.3 inspections
4.3.1 Periodically check the reel for any loose or missing fasteners.
Tighten or replace as necessary.
4.3.2 The slip ring assembly should be checked periodically as follows:
4.3.2.1 Clean to remove dust and dirt from the slip ring housing area and
all slip ring assembly and brush surfaces.
4.3.2.2 Brushes should be centered on slip rings and brush springs should
be seated in terminal post grooves. Terminal screw connections should be
tight. Check for excessive brush wear. Replace brushes as necessary.
4.3.3 Inspect cable for damage or wear which would make it unsafe to use.
4.4 Slip ring replacement
4.4.1 The slip ring assembly should be replaced, not rebuilt, if it becomes damaged.
4.4.2 Follow steps 4.5.5 through 4.5.8 to remove the slip ring assembly.
4.4.3 Carefully and thoroughly clean the inside of the reel drum and the slip ring cover.
4.4.4 Follow steps 4.5.5 through 4.5.8 in reverse order to install the new slip ring stack.
4.4.5 Replace cover Gasket if damaged.
caution: Damaged gaskets affect ul rating of the reel.