Operating Instructions
Balancer
040874-…x2,0
BAL0400-0072a-D/E/F
www.conductix.com
Seite 14 von 29
Please note!
When using screw fastening devices for the installation of the balancer or for the fastening of the safety wire on point “S”,
self-closing systems and / or splints must be used.
•
Suspend the load on the safety hooks (29).
•
Never lubricate the balancer with inflammable or volatile fluids.
Never remove the labels. All damaged labels have to be replaced.
Drawing C
If an horizontal displacement is necessary, which
needs a larger angle than the maximum scheduled
one, there are two possibilities:
Install the balancer further above by
using an extension (P-Option). Whereby the dimension
“I” has to be taken into consideration (drawing C).
Hang the balancer on a sliding carriage (C). Thanks
to its horizontal movement, the required working
position can be reached.
2
Safety and adjustment indications
Drawing E
The locking screw (6) can take 2 positions:
- Position „A“ : The reel is locked.
– Position „B“ : The reel is released.
(Drawing E)
