Deko-Light Elektronik-Vertriebs GmbH
30.04.2020
www.deko-light.com / [email protected]
Technische Daten können ohne Vorankündigung geändert werden. Irrtümer vorbehalten.
1 / 4
Product-Notes
Track system 3-Phases 230V, D Line
Dear customer,
thank you for deciding to purchase our product. The product fulfils the requirements of effective European and
national guidelines.
To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the
product notes and the operation manual! They contain important information for the start-up and handling. It is
important, therefore, that these documents are archived carefully for referring to information at a later stage.
1. General Safety Instructions
We are not responsible for any property damage or personal injury caused by failure to observe these product
notes and manual, improper handling or unauthorised modifications.
It can only be installed by a qualified electrician.
Make sure that the item has not been damaged during transport before putting the light into operation. It may
not be operated if there are any damages to electrical parts.
The connection lines in the building must be disconnected before installation and secured against being
switched back on. For this, trip the corresponding fuse switch in the building installation.
We recommend that you protect the product with a residual-current-operated protective device. Follow all
installation regulations applicable at your location.
Make sure the electrical specifications for the connection lines correspond with the specifications given on the
nameplate of this product.
Do not allow the product to come into contact with extreme heat or naked flames.
The product must not be covered with objects (decorations) or thermally insulating coverings /similar
materials.
Before disposal of the packaging material make sure that all components are removed.
Keep packaging material away from the reach of children and pets. The packaging contains small parts that
may be swallowed by children.
Please never use discharge lamps, fluorescent tubes etc. and LED lights in mixed operation within a track
system. In most cases, this leads to premature failure of the LED lights.
