Dekema AUSTROMAT 624 Operating Instructions Manual Download Page 44

Page: 44 / 155

5. User interface

AUSTROMAT

624 / 644

Operating Instructions (Version 01/2012)

5.1.5.

Keyboard window for the classic editor

The keyboard window for the classic editor automatically appears when you click a command
line of a classic program in the program editor.

Fig. 5-3

Keyboard window for the classic editor

Editing the command line

•

Click [Edit] to edit the command line. The text appears blue,

•

Use the cursor keys to edit the command line at the desired place,

•

The existing commands are normally overwritten. Click [Insert] to insert commands,

•

Click [Enter] to close your entry,

•

The classic keyboard window is closed.

Terminating an entry

•

Click [ESC] to terminate the entry,

•

An entered command line is not accepted,

•

The classic keyboard window is closed.

Summary of Contents for AUSTROMAT 624




























































































































































Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands

Dekema AUSTROMAT 624, Operating Instructions Manual

Search results

Summary of Contents for AUSTROMAT 624

Reviews:

Related manuals for AUSTROMAT 624

Brands by name

Popular brands