Deif AGC-4, Quick Start Manual

Page: 18 / 25

Click the "Read parameters from the device" icon.
After retrieving all the parameters, the device is ready to be configured.
4.2.5 Basic configuration of a device using the utility software
When the parameters have been uploaded, the options below will be available.
Click the "Gen" tab.
The parameters can be configured as follows:
Click a parameter and the dialogue box below will appear.
Click this or use the bar to adjust the set point, then click "Write" and
"OK".
The parameter set point has now been changed and downloaded to the device.
INFO
For further information, see the "General Guidelines for Commissioning".
QUICK START GUIDE 4189340689E EN Page 18 of 25