9
9
Disarming
Press
to disarm the security system. If the power locks
are controlled by the system, the doors will also unlock.
Disarming is confirmed when the parking lights flash twice
and the siren chirps twice. If the siren chirps more than two
times and the LED continues to flash after pressing the
button, the system was triggered in your absence.
Refer to the disarming diagnostics section to determine the
cause.
Disarming without a transmitter
If your remote transmitter is lost or damaged, you can manu-
ally disarm the security system. To disarm the system without
a transmitter, you must have the vehicle's ignition key and
know where the Valet switch is located. Be sure to check with
your installer at the time of installation for the location of the
Valet switch.
To disarm the security system, turn the igni-
tion key on.
Press the Valet switch within 15 seconds. The
system should now disarm. If the system does
not disarm, you may have waited too long to
press the Valet switch; turn the ignition off
and repeat the process.
Location of Valet Switch______________________________
DRW-35
➜
➜
©
2004 Directed Electronics, Inc.
