14
© 2 0 0 1 d i r e c t e d e l e c t r o n i c s , i n c .
To exit Timer Mode:
Timer Mode can be exited by turning the ignition on with the
key any time the engine is not running. You can also exit Timer
Mode with the remote transmitter by following these steps:
1. Start the engine by pressing
.
2. Press and release
.
3. Within two seconds press and release
again.
4. The engine will shut down and the parking lights will flash
four times to confirm that Timer Mode has been exited. If
the car has already been remote started, skip Step 1.
starterguard anti-grind circuitry
Whenever the vehicle is remote started, advanced anti-grind
circuitry prevents the starter from engaging, even if the key is
turned to the start position. This prevents damage to the starter
motor if the key is turned to the start position during remote
engine starting operation.
disabling the remote engine starting system
This feature allows your system's remote engine starting unit to
be temporarily disabled to prevent the vehicle from being remote
started accidentally. This feature is useful if the vehicle is being
serviced or stored in an enclosed area. To disable the remote
➜
note:
Anti-grind circuitry only works when the remote
engine starting system is operating the motor and the
starter interrupt relay is installed.
➜
