16
©
1999 Directed Electronics, Inc.
Programming Options
Programming options control your system's normal, operational
set-up. Most options do not require additional parts, but some
may require additional installation labor.
This system's programming options are listed below, with the
factory default settings in
bold
:
■
12
, 24, or 60 minute run time. Your system can be pro-
grammed to allow the vehicle to run for 12, 24, or 60 min-
utes when remote started or in Timer Mode.
■
Parking lights
flashing
or constant. Your system can be pro-
grammed to either flash or to turn on the parking lights con-
stantly during the entire remote start operation.
■
Passive Mode or
Active Mode
. In Passive Mode the Failsafe
®
Starter Kill will automatically activate 30 seconds after the
ignition has been turned off.
■
The ignition switch-controlled door-locking feature
on
or off.
With this feature on, the doors will lock 3 seconds after the
ignition key is turned on, and unlock when the ignition key
is turned off.
■
Passive Locking or
Active Locking
(doors lock only with the
transmitter). With Passive Locking, the vehicle doors lock
automatically 30 seconds after the ignition has been turned
off. Passive Locking can only be selected when the system
has been programmed for Passive Mode.
