7
©
1999 Directed Electronics, Inc.
To enter Timer Mode:
1.
Turn the ignition on.
2.
Press and hold the auxiliary channel button controlling
remote start.
3.
Turn the ignition off while holding the auxiliary channel
button.
The parking lights will flash four times and the engine will then
start to confirm that Timer Mode has been entered.
The engine may be allowed to run for its preset time or can be shut
down by pressing the auxiliary channel again. Either way, it will
restart every three hours for a total of six cycles. If the unit
receives a shutdown input while operating in the timer mode the
engine will stop, but will restart, on schedule, again in three
hours!
To exit Timer Mode:
Timer Mode can be exited by turning the ignition on with the key
any time the engine is not running. The parking lights will flash
four times to confirm that Timer Mode has been exited.
The Valet
®
Take-Over feature allows the vehicle to remain running
after the key has been removed from the ignition. This feature is
useful for occasions when you wish to exit and lock the vehicle for
short periods of time, but would like to leave the motor running
and the climate controls on.
Valet
®
Take-Over
Summary of Contents for 551 T Series
Page 1: ...551T Series Owner s Guide ...
